Garmin GNS 430 Pilot's Manual & Reference page 51

6. To select between "bearing FROM" or "bearing TO" to the reference waypoint, rotate the small
a
right knob ( ) to select the desired bearing reference and press
7. Press the small right knob (
8. If "WPT" is selected as the waypoint type, you can designate any airport, NAVAID or user
waypoint as a reference waypoint. Press the small right knob (
d
( ) to highlight the waypoint identifier field, then use the small (
knobs to enter the identifier of the desired waypoint. Press
points. Press the small right knob (
Restoring Factory Settings
A "Restore Defaults?" option allows you to reset all data fi elds to their original factory
default settings. This will return the three user-selectable fi elds at the top of the page
AND the reference waypoint fi elds to default settings.
To restore the factory default settings:
1. Press to display the position page options menu.
m
2. Rotate the large right knob (
E
) momentarily to remove the cursor from the page.
r
r ), rotate the large right knob
a
to confirm the selected way-
E
) to remove the cursor.
r
d
) to highlight "Restore Defaults?" and press
.
d
) and large ( ) right
.
E
NAV PAGES
2
Position Page
43