Section 2: Nav Page Group (Gps Navigation); Nav Pages - Garmin GNS 430 Pilot's Manual & Reference

NAV Pages

Main Page Groups
The GNS 430's main pages are divided into groups: NAV, WPT, AUX and NRST.
While viewing any of these pages, selection of another page is a simple selection process
a d
using the small ( ) and large (
NAV WPT
10 available
6 available
pages (see list pages (see list
on pg. 94)
below)
To select the desired page group, rotate the large right knob (
desired group is displayed.
To select the desired page within the group, rotate the small right knob (
desired page is displayed.
NAV Page Group
Default NAV NAVCOM
Map
The NAV page group includes six pages. While viewing any NAV page, rotate the
a
small right knob ( ) to select a different NAV page. You may fi nd this selection process
convenient to cycle between the default NAV and map pages—two of the most frequently
used pages. Other pages are provided to list frequencies for your fl ight plan, show your
current position, display current satellite reception, and make vertical navigation settings.
Section 2
) right knobs.
AUX
4 available
pages (see list
on pg. 135)
d
Satellite Status
Position
NRST
8 available
pages (see list
on pg. 119)
The bottom right corner of the screen indi-
) until a page from the
cates which page group is currently being
displayed (e.g., NAV or NRST), the number
of screens available within that group (indi-
a
) until the
cated by square icons) and the placement
of the current screen within that group
(indicated by a highlighted square icon).
To select a different page within the group,
rotate the small right knob (
VNAV
This part of the screen is also used to display
the GNS 430's turn advisories (e.g., "Turn to
230°") and waypoint alerts (e.g., "Next DTK
230°") during flight plan and approach opera-
tions. See Section 5 for more information.
NAV PAGES
2
Page Groups
NAV Page Group
a
).
27