Airport Departure Page Options - Garmin GPS 500 Pilot's Manual & Reference

F
NOTE: "ALL" may appear in the runway field, indicating the departure procedure applies to all
runways. For airports with parallel runways, "B" may appear at the end of the runway designa-
tion to indicate the departure procedure applies to both runways.
6. Press ENT. The cursor moves to the transitions (TRANS) field.
7. Rotate the small right knob to display a window of available transitions. Continue rotating the small right
knob to select the desired transition.
8. Press ENT. To remove the flashing cursor, press the small right knob.

Airport Departure Page Options

The following option is available for the Airport Departure page, by pressing the MENU key:
Load into Active FPL? allows you to load the selected departure into the active flight plan. This
is identical to loading a departure procedure from the Procedures page, as described on page 55.
To load a departure procedure from the Airport Departure page:
1. Select the desired departure, runway and transition using the steps above.
2. Press MENU to display the Airport Departure Page options.
3. Press ENT to select the "Load into Active FPL?" option.
4. The Active Flight Plan page appears. Press FPL to return to the Airport Departure page.
5 - WPT PAGES
Airport Departures
STEP 7: With the "TRANS" field highlighted, rotate
the small right knob to select the desired
transition.
STEPS 2 & 3: From the Airport Departure page,
press MENU to display an options list. "Load into
Active FPL?" allows you to add the arrival
procedure to the beginning of your flight plan.
89