Using The; Selecting A Destination From The Active Flight Plan - Garmin GNS 430 Pilot's Manual & Reference

Selecting a Destination from the Active Flight Plan

If you're navigating an active fl ight plan, any waypoint contained in the fl ight plan may
be selected as a direct-to destination from the select direct-to waypoint page. (See section
4, beginning on page 54, for more information on fl ight plans.)
To select a direct-to destination from the active flight plan:
1. Press the key. The select direct-to waypoint page will appear, with the waypoint identifier
D
field highlighted.
d
2a. Rotate the large ( ) right knob to highlight the flight plan (FPL) field.
3a. Rotate the small right knob (
plan.
4. Continue rotating the small right knob (
waypoint.
5. Press to confirm the selected waypoint, and
E
Selecting the Nearest Airport as a Direct-To Destination
The select direct-to waypoint page always displays the nearest airports (from your
present position) on the NRST fi eld. Navigating directly to a nearby airport is always just
a few simple steps away. (Nearby airports may also be selected as direct-to destinations
using the steps described on page 121.)
To select a nearby airport as a direct-to destination:
1. Press the key. The select direct-to waypoint page will appear, with the waypoint identifier
D
field highlighted.
d
2b. Rotate the large ( ) right knob to highlight the nearest airport (NRST) field.
3b. Rotate the small right knob (
4. Continue rotating the small right knob (
airport.
5. Press to confirm the selected airport, and
E
a
) to display a window showing all waypoints in the active flight
a
) to scroll through the list and highlight the desired
to activate the direct-to function.
E
a
) to display a window showing up to nine nearby airports.
a
) to scroll through the list and highlight the desired
to activate the direct-to function.
E
DIRECT-TO
Flight Plan Waypoints
Nearest Airports
3
a
a
b
51