Phone Book Access Profile Services - Motorola MC55 User Manual

5 - 46 MC55 User Guide
If an Authentication is required, the Enter Passcode screen appears, type an alphanumeric passkey (PIN
code), then tap Next; enter the same passkey on the other device.
The passkey is recommended for enhanced security. Your passkey must be between 1 to 16 alphanumeric
characters.
If you do not want to use a passkey, tap Next.
To disconnect the ActiveSync connection, tap the ActiveSync icon on the Today screen.
14.
Tap Disconnect.
15.

Phone Book Access Profile Services

Phone Book Access profile (PBAP) is used to synchronize contacts between a remote device and the MC55. To
establish an PBAP synchronization:
Ensure that Bluetooth is enabled and discoverable on both devices.
1.
Ensure that the two devices are within 30 feet (10 meters) of one another.
2.
Tap Start > Settings > Connection tab > Bluetooth icon > Devices tab.
3.
Tap Add New Device.The MC55 searches for a Bluetooth device, such as a Car Kit.
4.
Select a device from the list.
5.
Tap Next. The Enter Passcode window appears.
6.
NOTE If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter Passcode
window does not appear.
Enter the Passcode and the tap Next. The device is added to the Bluetooth list.
7.
A dialog box appears requesting if you want to transfer contacts to the car kit.
8.
Select Yes or No.
9.
If Yes is selected, contacts from the MC55 are transferred to the car kit.
10.