Hands-Free Services; Serial Port Services - Motorola MC55 User Manual

To end dial-up networking, on the MC55 tap Disconnect.
9.

Hands-free Services

To connect to a Bluetooth headset:
Newer Bluetooth headsets are device dependant and remember the last device they connected to. If problems
NOTE
occur while connecting to the headset, place the headset in discovery mode. Refer to the headset user manual
for more information.
Only WAN audio is routed to the headset. System audio is still emitted through the MC55 speaker.
You can accept calls and re-dial using the Hands-free profile.
Hands-free profile does not support 3-way calling.
Ensure that Bluetooth is enabled and discoverable on both devices.
1.
Ensure that the two devices are within 30 feet (10 meters) of one another.
2.
Tap Start > Settings > Connections > Bluetooth icon.
3.
Tap New device. The MC55 searches for Bluetooth devices in the area.
4.
Select the headset name and tap Next. The Passcode window appears.
5.
Enter the headset's passcode.
6.
Tap Next. The MC55 connects to the headset. Refer to the headset user manual for instructions on
7.
communicating with a Bluetooth device.
NOTE During an active connection, the MC55 cannot go into suspend mode when the Power Button is pressed.
A message appears notifying the user.
Once the WAN call is disconnected (with Hands-free profile) the Power button is enabled.
WWAN Bluetooth Audio Notification Dialog Box
Figure 5-57

Serial Port Services

Use the wireless Bluetooth serial port connection as you would a physical serial cable connection. Configure the
application that will use the connection to the correct serial port.
To establish a serial port connection:
Headset icon
Using Bluetooth 5 - 43