Disabling A Pin; Services; Call Barring - Motorola MC45 Integrator Manual

Use the dialer keypad to enter a new four to eight digit PIN.
4.
Tap Enter.
5.
Reenter the new PIN for confirmation and tap Enter.
6.
Tap OK to confirm the change
7.

Disabling a PIN

Deselect the Require PIN when phone is used check box.
1.
Use the dialer keypad to enter the current PIN.
2.
Tap Enter.
3.
Tap OK to confirm the change and exit settings.
4.

Services

Use the Services tab to configure settings for subscribed phone services. For example, block certain types of
incoming and/or outgoing calls (
5-6), forward incoming calls to a different phone number (
a phone session is in use (
Tap Start > Settings > Personal > Phone > Services tab.
1.
Figure 5-4 MC45 Phone Window - Services Tab
Select a service from the list and tap Get Settings... .
2.
Change services settings as follows.
3.

Call Barring

Use call barring to block certain types of incoming and/or outgoing calls. Select the type of incoming and/or
outgoing calls to block.
page 5-5), disclose the caller's identity when making outgoing calls (
page 5-7), and set up voice mail and short message service (
page 5-6), receive notification of incoming calls when
Phone Setup 5 - 5
page
page 5-7).