Using The Rs507 Hands-Free Imager; Digital Camera Scanning - Motorola MC55 User Manual

Pick List Mode with Multiple Bar Codes in Aiming Pattern
Figure 2-28
Release the scan button.
4.
NOTE Imager decoding usually occurs instantaneously. The MC55 repeats the steps required to take a digital
picture (image) of a poor or difficult bar code as long as the scan button remains pressed.

Using the RS507 Hands-free Imager

An RS507 Hands-free Imager can be used with the MC55 to capture bar code data.
NOTE OEM version 02.35.000 or higher is required.
To set up the RS507:
Tap Start > Programs > BTScannerCtlPanel icon.
1.
If required, select the BT Scanner checkbox and then select the appropriate Com port from the drop-down list.
2.
Tap Save and Exit.
3.
Tap Start > Programs > BD Address icon. A bar code displays.
4.
Point the RS507 to the bar code. The RS507 reads the bar code and begins pairing with the MC55.
5.
Refer to the RS507 Hands-free Imager Product Reference Guide for more information.

Digital Camera Scanning

Ensure that a scan-enabled application is loaded on the MC55.
1.
Aim the camera lens on the back of the MC55 at a bar code.
2.
Press and hold the scan button. A preview window appears on the display window with a red aiming reticle in
3.
the center. The Scan/Decode LED lights red to indicate that scanning is in process.
Decoded Not Decoded
Using the MC55 2 - 39
Decoded Not Decoded