Checking Battery Status; Replacing The Battery; Removing The Microsd Card - Motorola MC55 User Manual

Repeat as the target moves around the screen, then tap the screen to continue.
3.

Checking Battery Status

NOTE To check battery status, remove the MC55 from any AC power source (cradle, cables, etc.)
To check the charge status of the main battery in the MC55, tap Start > Settings > System tab > Power icon to
display the Power window.
To save battery power, tap the Advanced tab and set the MC55 to turn off after a specified number of minutes.

Replacing the Battery

Press the red Power button to suspend the MC55.
1.
Use finger or stylus to slide the battery latch to the right releasing the battery. The battery ejects slightly.
2.
Removing the Battery
Figure 1-8
Lift the battery from the MC55.
3.
Insert the replacement battery, bottom first, into the battery compartment in the back of the MC55.
4.
Press the battery down until the battery release latch snaps into place.
5.
The MC55 powers up after inserting the battery.

Removing the microSD Card

To remove an microSD card:
Press the red Power button to suspend the MC55.
1.
Remove the battery.
2.
Lift the rubber access door.
3.
Battery Latch
Getting Started 1 - 9