Cables; Battery Charging And Operating Power - Motorola MC55 User Manual

Cables

This section describes how to set up and use the cables. The cables are available with a variety of connection
capabilities.
The following communication/charge cables are available:
•
USB Charging cable
• Provide the MC55 with operating and charging power when used with the Motorola approved power
supply.
• Synchronize information between the MC55 and a host computer. With customized or third party software,
it can also synchronize the MC55 with corporate databases.
•
Charge Only cable
• Provide the MC55 with operating and charging power when used with the Motorola approved power
supply.
•
Auto Charge cable.
• Provide the MC55 with operating and charging power when used with the Motorola approved power
supply.

Battery Charging and Operating Power

The communication/charge cables can charge the MC55 battery and supply operating power.
To charge the MC55 battery:
Connect the communication/charge cable power input connector to the Motorola approved power source.
1.
Slide the bottom of the MC55 into the connector cup end of the communication/charge cable and gently press
2.
in until it latches into the MC55.
Slide the two locking tabs up until they both lock into position.
3.
Accessories 6 - 11