Exclude All Z-Wave Devices; Abort A Z-Wave Action - Honeywell Tuxedo Touch Series Installation And Setup Manual

Exclude All Z-Wave Devices

ICON
1. At the Tuxedo Touch Keypad:
a) Press the Automation icon from
the "Home" screen and then press
the Z-Wave Setup icon to display
the "Z-Wave Device Management"
screen.
b) Press the Z-Wave Reset icon to
delete all devices from the
controller.
c) Press the Continue or Cancel
button.

Abort a Z-Wave Action

ICON
1. At the Tuxedo Touch Keypad:
a) Press the Automation icon from the
"Home" screen and then press the Z-
Wave Setup icon to display the "Z-
Wave Device Management" screen.
b) Press the Z-Wave Abort Operation
icon to abort that process.
Automation (cont'd)
ACTION
ACTION
32
NOTES
The message is displayed:
WARNING!! This Z-WAVE controller is about to
be factory defaulted and will loose all devices
in the enrolled list. All Z-WAVE devices must
be re-enrolled.
NOTES
If inadvertently a wrong process is selected, (i.e.,
add, delete, or remove failed device) press the Z-
Wave Abort icon to abort that process.