Code Authority; Device Events; Panel Configuration - Honeywell Tuxedo Touch Series Installation And Setup Manual

Code Authority

The Code Authority screen displays User Names and Partition Authority Level for the User Code. To
view the Code Authority level, do the following:
ICON
1. Press the Code Authority icon.
2. Enter the 4-digit User Code for the
user that you want to obtain Authority
Level information about.
3. Press BACK.

Device Events

Your system has the ability to record events in a history log. Each event is recorded with the time and
date of its occurrence. The control panel must be programmed to record various system events in
installer programming mode. To view the Device Events, perform the following:
ICON
1. Press the Device Events icon. A list
of events is displayed.

Panel Configuration

The Panel Configuration screen displays the configuration of the panel. To view the panel
configuration, do the following:
SCREEN
1. Press the Panel Configuration icon.
2. If correct, press Back to return to
"System Setup" screen.
System Setup (cont'd)
ACTION
ACTION
ACTION
20
NOTES
Note: If the User Code entered is not active in the
system, a "NOT VALID" message will be displayed.
NOTES
To view a record of events in a history log, press the
up/down arrow to scroll.
NOTES
A "Panel Configuration" screen is displayed
providing details of your system.
Delete clears the configuration from the keypad and
reloads the panel configuration into the keypad from
the panel.
After you press Delete, a confirmation screen is
displayed.