Honeywell Tuxedo Touch Series Installation And Setup Manual page 23

Operating in the Safe Mode
While in the Safe Mode, the Home screen displays the Security Icon, Panic Icon, and Message Icon. A
message at the lower left side of the screen is displaying: !SAFE MODE!
This is a limited mode of operation. While in this mode:
• You can use the Security icon to access the Console Emulation Mode of operation to try to clear your
faults, disarm the system, or enter additional Alpha Keypad commands specified in your panel User
and Installation Guides. You can perform almost all functions that you can perform from a standard
non-graphic alpha keypad.
• You can press the "Panic" icon and generate Emergency Messages as defined in the panel's home
partition for this keypad.
• The Armed and Ready LEDs on the front of the keypad indicates the keypad's home partition status.
• The Chime mode functions in the Safe Mode: however, you do not have Voice, Voice Chime, or
Message capability.
• Z-Wave Scenes do not function in Safe Mode.
• The Slide Show feature does not start automatically in Safe Mode.
Screen Security
The Screen Security icon displays a list of authority levels and the user level that has been given
access to them. To view and/or edit Screen Security, do the following:
ICON
1. From the System Setup screen, press
the CS Setup icon.
2. Enter your Authorized Code.
3. Press the Screen Security icon.
4. If authority levels are correct, press
BACK or Home to exit the menu.
5. If changes are necessary, select the
line to be changed and the level of user to
have access; then select OK or Cancel.
Residential Panels and Screen Security
Authority Level in Panel
System Master
Partition Master
Standard User
Arm Only
Guest
Duress
System Setup (cont'd)
ACTION
Access Level Chosen in Keypad Screen Security
Matching
Authority
Level in
Keypad
Master No Yes
Master No Yes
Normal No No
N/A No No
Guest No No
N/A No No
Note: The Screen Security screen contains a
heading of Advanced Setup, Central Station Setup,
Disp. & Audio Setup, Event Logs, Lighting,
Message, Security, or Time/Date highlighting the
line was selected for change.
The Screen Security screen is re-displayed listing
any changes.
Note: The User Levels listed on this screen match
the User Levels in commercial panels. See the
following chart for corresponding User Levels in
Residential Panels
Yes Yes Yes
Yes Yes Yes
No Yes Yes
No No
No No Yes
No No
19
NOTES
.
Yes
Yes
Yes
No No
Yes
No No