Time And Date Setup; Night Setup; Web Server/Hosting; Ip Setup - Honeywell Tuxedo Touch Series Installation And Setup Manual

Time and Date Setup

If not already set from the control panel, set the current time and date. Refer to Time/Date Setup.

Night Setup

The Keypad is defaulted to arm the system in the STAY INSTANT mode when arming the system
using the NIGHT icon. Select the arming mode to be activated when the NIGHT icon is pressed on the
"Arming" screen, refer to the "Night Setup" section.

Web Server/Hosting

The Tuxedo Touch keypad offers web-hosting capability allowing you to access your Security and Home
Automation System via any web enabled device. The Tuxedo Touch keypad IP Address is displayed on
the "IP Setup" screen as well as on the "Home" screen. This IP Address is used on a standard web
browser to control user functions such as, Security, Z-Wave operation and camera viewing.
Web Server/Hosting is not Listed for use in UL installations. Remote Arming/Disarming/Programming
U L
is not to be used in UL Listed Installations.
From your web enabled device, do the following:
1. At your PC, Smart Phone or Tablet:
a) Navigate to the Settings feature.
b) Turn ON the "Wi-Fi" setting and select the
router to connect to. Enter a name and
password, if required.
c) Open the browser and enter the IP Address
displayed on the keypad into your browser.
You can now control your Security System, local Z-Wave
devices and view your local cameras from your browser.

IP Setup

Follow the steps below to control your local Z-Wave devices via your PC, Smart Phone or Tablet.
Automatic IP Addresses
In most cases, IP addresses are assigned automatically by your Internet Service Provider. The IP
Address is displayed in the lower left-hand corner on the Tuxedo Touch Keypad "Home" screen.
To access "IP Setup", from the "Home" screen, do the following:
ICON
1. At the Tuxedo Touch keypad:
a) Press the Setup icon.
b) Press the IP Setup icon. The "IP
Setup" screen displays the IP
Address and Default Gateway
Address of your router.
c) Press the Refresh button; the IP
information will automatically
update. This may take up to 60
seconds.
2. Press Apply; the keypad will save
the information and reset.
Initial Setup (cont'd)
ACTION
ACTION
•
If using a Smart Phone or Tablet browser, access
to basic arming commands are available.
•
If using a PC browser, full access to keypad
options are available.
Take note of the address; you will need to enter this
address into your browser.
After proper setup, the IP Address is displayed on the
"Home" page.
9
NOTES
NOTES