Honeywell Tuxedo Touch Series Installation And Setup Manual page 14

ICON
To set up a User Account:
1. Press the Account Setup button.
2. Highlight the User ID number on the
screen and enter a user name; press OK.
3. Highlight the User ID number again
and enter a user password; press OK.
4. Press the Save icon. The new user is
displayed on the screen.
5. Press Apply.
6. To delete a user, highlight the User
Name and press the Delete button.
Fixed IP Addresses
If the IP Address is not displayed in the lower left-hand corner on the Tuxedo Touch Keypad "Home"
screen, you may require a fixed IP Address. Obtain the IP Address by contacting your Internet Service
Provider and then do the following:
ICON
1. At the Tuxedo Touch Keypad:
a) Press the Setup icon and then press
the IP Setup icon; the "IP Setup"
screen is displayed.
Press the button next to Obtain an IP
b
)
address automatically to de-select it.
c) Enter the "IP Address" by pressing
the first set of 3 zeros ("000") on the
screen, and enter the first three
numbers of the IP address on the
"Data Entry Keyboard". Repeat this
step until the complete address has
been entered and press Apply.
2. At your PC, Smart Phone or Tablet
Browser:
a) Start your browser and enter your IP
Address.
Initial Setup (cont'd)
ACTION
ACTION
10
NOTES
Note: Account Setup allows you to add up to 5 users.
Use the Data Entry Keyboard to enter the required
information.
•
Use the Shift key for capital letters
•
Use the BS (Backspace) key to make corrections.
•
Press OK
A pop-up window displays the message:
Save the Change
Select Yes to save the settings.
Select No to cancel.
NOTES
Use the Data Entry Keyboard to enter the required
information.
•
Use the Shift key for capital letters
•
Use the BS (Backspace) key to make
corrections.
•
Press OK
A pop-up window displays the message:
Settings Changed! Remember new settings?
Select Yes to save the settings.
Select No to cancel.