Specifications; Front Panel Leds - Honeywell Tuxedo Touch Series Installation And Setup Manual

Specifications:

Front Panel LEDs

The Tuxedo Touch Keypad has three LEDs as follows:
*Note: If the EN50131 Display feature is enabled, the "Armed" and "Ready" status LEDs turn OFF after 30
seconds and the screen returns to the Home screen until a valid user code is entered.
About the System (cont'd)
Mechanical Specifications:
Width: 8.23 inches (209.04mm)
Height: 5.59 inches (141.99mm)
Depth:1.13 inches (28.70mm)
Electrical Specifications:
Backlight OFF, Sound OFF
Backlight ON, Sound OFF
Backlight ON, Sound ON
Operating Environment:
Humidity 93% RH, non- condensing
Temperature:
Operating 14˚ F to 131˚ F / -10˚ C to 55˚ C
(UL tested 32˚-120˚F / 0 to 49˚C)
Shipping / Storage -40˚ F to 158˚ F / -40˚C to 70˚C
12V, 140mA
12V, 205mA
12V, 310mA
SD/SDHC CARD Slot
ARMED (RED) LED
ON – System is armed.
OFF – System is not armed.
READY (GREEN) LED
ON – System is disarmed and ready to arm.
OFF – System is armed or disarmed but not
ready. If disarmed, faults or troubles are present.
MESSAGE (YELLOW) LED
FLASHING – The system contains new
message(s) for the User.
OFF – No new messages.
RESET BUTTON
Press to reset keypad
5
6280-001-V0