User Setup; Authority Levels - Honeywell Tuxedo Touch Series User Manual

SCAN SECURITY
User Setup allows you to Add a User, Delete a User, and Edit a User. You may access User Setup from the System Setup
screen. Each user must be assigned a name with a corresponding 4-digit user code in order to gain access to various features and
functions. The keypad can hold the identity for 10 Users in its memory. If additional Users are needed, define the additional
Users using the Console Emulation Mode.
Users for the system are programmed in a central user setup location that provides the specific questions for authorization levels
assigned to different users. You may want these users to be the same, but there are situations in which you may want a user to
have limited capabilities. These capabilities are defined by the Authority Level assigned each user.

Authority Levels

Authority levels define the system functions a particular user can perform. Depending on the authority assigned to you, there are
certain system functions you may be prohibited from performing. The following information describes the authority levels that
can be assigned through the keypad and provides the equivalent authority level name found in your alarm system manuals. The
authority levels that can be assigned are as follows:
Authority Functions
Level
Master Can perform all security functions, add/delete users in assigned partition,
program scheduled events, and change partition master code
Normal Perform security functions (arm, disarm)
Guest Can arm the system in assigned partitions, but cannot disarm the system
unless the system was armed with this code.
Note: Do not assign this level if Quick Arm is enabled in your system.
No Used to restrict access from a partition.
Access

User Setup

28
Equivalent System Name
Residential Commercial
Systems Systems
Partition Master Level 1 Master
Standard User Level 3 Operator A
Guest Level 4 Operator B
N/A N/A