User Setup; Authority Levels; How To Add A User - Honeywell Tuxedo Touch User Manual

User Setup

allows you to Add a User, Delete a User, and Edit a User. You may access User Setup from the System Setup
screen. Each user must be assigned a name with a corresponding 4-digit user code in order to gain access to various features and
functions. The keypad can hold the identity for 10 Users in its memory. If additional Users are needed, define the additional
Users using the Console Emulation Mode.
Users for the system are programmed in a central user setup location that provides the specific questions for authorization levels
assigned to different users. You may want these users to be the same, but there are situations in which you may want a user to
have limited capabilities. These capabilities are defined by the Authority Level assigned each user.

Authority Levels

Authority levels define the system functions a particular user can perform. Depending on the authority assigned to you, there are
certain system functions you may be prohibited from performing. The following information describes the authority levels that
can be assigned through the keypad and provides the equivalent authority level name found in your alarm system manuals. The
authority levels that can be assigned are as follows:
Authority Functions
Level
Master Can perform all security functions, add/delete users in assigned partition,
program scheduled events, and change partition master code
Normal Perform security functions (arm, disarm)
Guest Can arm the system in assigned partitions, but cannot disarm the system
unless the system was armed with this code.
Note: Do not assign this level if Quick Arm is enabled in your system.
No Used to restrict access from a partition.
Access

How to Add a User

ICON
1. From the "Home" screen, press the
Setup icon.
2. Press the System Setup icon.
3. Press the USER SETUP icon.
4. Press the ADD USER icon and enter
your Authorized Code.
5. Press the box next to Enter User Name.
User System Setup
ACTION
Use the Data Entry Keyboard to enter all required information.
Enter the user name (6 characters max.; no spaces between characters) and
press the GO icon.
• Press the Up Arrow key to switch to capital letters
• Press the X key to delete
• Press the ABC/.?123 key to switch between numerals and
symbols/characters.
• Press GO to return to the "Add User" screen.
Equivalent System Name
Residential
Systems
Partition Master
Standard User
Guest
N/A
NOTES
28
Commercial
Systems
Level 1 Master
Level 3 Operator A
Level 4 Operator B
N/A