User System Setup; Time/Date Setup; Setting Daylight Savings Time - Honeywell Tuxedo Touch Series User Manual

SCAN SECURITY

Time/Date Setup

You can set the time and date from the Set Time & Date screen.
•
When the time is set it is stored in the keypad and sent to the control panel when you press the Apply icon and answer Yes
to the following prompt. Additionally, when using the keypad with a residential panel, the panel downloads its time into the
keypad once an hour after the clock is set.
•
If Get Time is pressed, the keypad downloads the time and date from the control panel and exits the Set Time & Date
screen.
Note: This icon ( ) appears with residential panels and may not appear with all commercial panels.

Setting Daylight Savings Time

To set the daylight savings time do the following:
ICON
1. Press the Time/Date Setup icon; enter
your Authorized Code.
2. Press the DST icon if you want daylight
savings time to affect your system clock.
3. Set the "Start DST" time and then the
"End DST" time by pressing the Month,
Weekend and Hour that you want DST to
start.
4. APPLY saves the settings.

User System Setup

ACTION
If DST On is selected, the keypad adjusts for Daylight Savings time at the
month, week and time chosen
Make sure "DST On" is checked to enable this feature.
NOTES
.
32