Time/Date Setup; Setting Daylight Savings Time; Setting Current Time And Date - Honeywell Tuxedo Touch User Manual

Time/Date Setup

You can set the time and date from the Set Time & Date screen.
•
When the time is set it is stored in the keypad and sent to the control panel when you press the Apply icon and answer Yes
to the following prompt. Additionally, when using the keypad, the panel may download its time into the keypad periodically
after the clock is set (for Vista residential and newer commercial panels such as Vista 128BPT).
•
If Get Time is pressed, the keypad (or a secondary keypad) downloads the time and date from the control panel and exits the
Set Time & Date screen.
Note: This icon ( ) appears with residential panels and may not appear with all commercial panels.

Setting Daylight Savings Time

To set the daylight savings time do the following:
ICON
1. Press the Time/Date Setup icon; enter your
Authorized Code.
2. Press the DST icon if you want daylight savings time
to affect your system clock.
3. Set the "Start DST" time and then the "End DST"
time by pressing the Month, Weekend and Hour that
you want DST to start.
4. APPLY saves the settings.

Setting Current Time and Date

To set the current time, do the following:
ICON
1. Press the Time/Date Setup icon; enter your
Authorized Code.
2. Press the Month "arrow", and select the current month.
3. Press the Year that is being displayed and enter the
current year.
4. Press the Hour that is being displayed and enter the
current hour.
5. Press the Minutes that is being displayed and enter
the current minute.
6. Press AM or PM. (Each depression switches the
AM/PM display).
7. Press the MMDDYY "arrow", and select a format for
which you want the year to be displayed.
8. Press Apply.
User System Setup (cont'd)
ACTION
ACTION
31
NOTES
If DST On is selected, the keypad adjusts for Daylight Savings
time at the month, week and time chosen
Make sure "DST On" is checked to enable this feature.
NOTES
After each selection the window closes automatically and the
selection is displayed.
Select if you want a 12-hour or 24-hour format for your time
display by pressing the circle to the left of the 12 Hour display.
A confirmation screen displays:
Time Setting Confirmation
Set time on the security system as well?
Yes or No
Yes saves the time changes in your security system.
No saves the changes to the keypad only.
Note: A Yes response is recommended.
.