4. COPYING ON SPECIAL TYPES OF PAPER
When making copies using thick sheets of paper or transparency (OHP) film sheets, use this mode for
1
improved toner image fusibility.
* Be sure to set thick paper and transparency (OHP) films on the sheet bypass.
* To output the transparency (OHP) films on the inner tray, install the guide for it.
2
1
Set the original(s).
3
2
Place the paper on the sheet bypass and set the
paper size.
• Bypass copying
4
3
Press the PROGRAM key to enter the program
menu. Then, press the SPECIAL PAPER key.
• If the key for the desired function is not shown, press the
5
Pre key to switch back to the previous screen.
6
4
Press the THICK PAPER (or TRANSPARENCY )
7
key.
Select other copy modes as required.
8
5
Press the
Tip
9
When outputting transparency (OHP) films, remove the films
one by one every time they exit.
10
11
12
5-8
USING THE SPECIAL FUNCTIONS
Page 2-4
Page 3-4
START key.
Page 5-9