Toshiba e-studio 45 Operator's Manual page 35

2. SETTING ORIGINALS (Cont.)
When Using the Reversing Automatic Document Feeder (optional)
1
Precautions for Using the Reversing Automatic Document Feeder (optional)
2
Do not use the following types of originals as they tend to misfeed or become damaged:
(1) Badly wrinkled or folded originals; in particu-
lar, originals whose leading edge is curled may
3
not be correctly fed into the reversing automatic
document feeder.
4
5
(2) Originals with carbon paper
6
(3) Taped, pasted or clipped (cut out) originals
7
8
Also, the following originals should be handled carefully:
9
(1) Folded or curled originals
should be smoothed out
10
before being used.
11
(3) Originals, two of which, when pinched between two fingers, can-
not be moved, or originals which are surface-treated, may fail to
be separated properly.
12
2-6
HOW TO MAKE COPIES
(4) Clipped or stapled originals
(5) Originals with holes or torn originals
(6) Damp originals
(2) Only originals with the
same width can be set at a
time. (Do not mix originals
with different widths.)
(7) OHP film originals