Toshiba e-studio 45 Operator's Manual page 48

When Non Standard Size Paper is Set
Set the paper size within the following ranges:
Length: 3.9" x 11.7" (100 ~ 297 mm)
Width: 5.8" x 17.0" (148 ~ 432 mm)
3 Press the NON STANDARD key.
4 Key in each dimension (length, width) .
• Key in the length with the digital keys and press the upper
SET key. Similarly, set the value for width.
5
Check the input size, then press the lower SET key.
Select other copy modes as required.
6 Press the START key.
Note
Remove copies made on special sheets of paper or OHP
films one by one. They should not be allowed to stack up in
the exit (inner) tray or finisher (optional).
1
2
3
4
5
6
7
8
9
10
11
12
3-5