Copy Paper; Acceptable Paper Types And Sizes/Handling And Storing Paper - Toshiba e-studio 45 Operator's Manual

2. COPY PAPER

Acceptable Paper Types and Sizes/Handling and Storing Paper

For optimum copy quality, use the paper recommended by Toshiba. Consult your service technician for
details.
Acceptable Paper Types and Sizes
Feeder Type of paper
• Cassette Plain paper
• Paper feed (17 ~ 22 lb.) only
pedestal
(optional)
• Large-capac- Plain paper
ity feeder (17 ~ 22 lb.) only
(optional)
• Sheet Multi-sheet feeding:
bypass Plain paper (17 ~ 22 lb.)
only
1-sheet feeding:
13 lb. Bond ~ 110 lb. Index,
tracing paper, OHP films,
labels
"Maximum capacity" refers to the number of sheets when the paper recommended by Toshiba is set.
Handling and Storing Paper
Pay attention to the following points:
• Avoid using paper that is specially treated or paper that was printed on another machine, and also
avoid performing double copying on the same side of paper; this may cause a malfunction.
• Do not use paper with creases, wrinkles or prone to curling, smooth paper, or tough paper; this may
cause paper misfeeds.
• Paper should be wrapped in its wrapping paper and stored in a damp-free place.
• To prevent paper from being folded or bent, store it evenly on a flat surface.
Paper size
Standard size 550 sheets
Letter format: (Height:
LD, LG, LT, LT-R, ST-R, approx.
COMP 2.36")
Standard size 2500 sheets
Letter format: LT only (Height: approx.
5.39" x2)
Standard size 100 sheets
Letter format: (Height: approx.
LD, LG, LT, LT-R, ST-R, 0.43")
COMP 1 sheet
Maximum
Remarks
capacity
Plain paper with holes for filing can-
not be used.
Plain paper with holes for filing can-
not be used.
Plain paper with holes for filing can-
not be used.
Also, some of the items specified
under "type of paper" may not be
used depending on type, thickness
or storing condition. (For details,
consult your service technician.)
1
2
3
4
5
6
7
8
9
10
11
12
1-9