Toshiba e-studio 45 Operator's Manual page 90

Single-feed Mode
1
Press the PROGRAM key to enter the program
menu, and press the ADF key.
• If the key for the desired function is not shown, press the
Pre key to switch the screen.
2
Press the SADF key.
Select other copy modes as required.
3
Set the original(s).
• The original is automatically pulled in and the screen
changes as shown on the right.
• If there are more originals, set them in the same way. (The
same operation is carried out whether or not you press the
YES key.)
4 After all originals have been fed through the revers-
ing automatic document feeder, press the FINISHED
key.
• Copying begins.
Page 2-6
1
2
3
4
5
6
7
8
9
10
11
12
5-3