Toshiba e-studio 45 Operator's Manual page 64

4
Adjust the width of the margin, then press the SET
key.
• The default width of the margin is 7 mm.
• To adjust the width, press the
select the desired number, then press the SET key.
• In duplex copying, margins on the back are created on the
other side of those in the front.
Duplex copying
Select other copy modes as required.
5 Press the START key.
Providing Book-binding Margin
When Book Margin is selected, use it in conjunction with the
DUPLEX COPYING mode from book originals (
or the Dual-Page Copying mode (double-sided) (
3 Press the BOOK key.
4 Adjust the width of the margin, then press the SET
key.
• The default width of the margin is 14 mm.
• To adjust the width, press the
select the desired number, then press the SET key.
Select other copy modes as required.
5
Press the START key.
Tip
Image shift copying can also be performed in bypass copy-
ing. To do this, after setting paper in the bypass tray (
Page 3-4), press the corresponding COPY SIZE key to
specify the size of the paper.
0mm or 30mm
Page 3-10
2mm or 30mm
key and
Page 3-13)
Page 4-5).
key to
1
2
3
4
5
6
7
8
9
10
11
12
4-3