Toshiba e-studio 45 Operator's Manual page 50

Specifying both Original Size and Copy Size
1 Set the original(s).
2
Press the ZOOM··· key on the basic screen.
3 Press the ORIGINAL SIZE key of the same size as
the original, then press the desired COPY SIZE key.
• Using the original size and copy size, the correct reproduc-
tion ratio is computed and displayed on the screen.
( OTHER key
• If the desired size of paper is not set in any of the cas-
settes, this message appears:
Set correct cassette
Then, install the correct sized cassette or use the sheet
bypass.
Select other copy modes as required.
4 Press the START key.
Page 2-4
Page 5-12)
1
2
3
4
5
6
7
8
9
10
11
12
3-7