Operating The Touch Panel - Sony DMX-R100 Operating Instructions Manual

Basic Components and Functions of the Windows
qa SNAPSHOT button
Touch this button to open the SNAPSHOT window
(page 72).
qs CUE button
Touch this button to open the CUE window (page 74).
qd AUTOMATION button
Touch this button to open the AUTOMATION
window (page 77).
qf MACHINE CONTROL button
Touch this button to open the MACHINE CONTROL
window (page 80).
qg SYSTEM button
Touch this button to open the SYSTEM menu which
allows you to select the windows that control system
settings.
The display changes to the one corresponding to the
selected window.
SYSTEM menu
• TITLE MANAGER (page 82)
• MIDI (page 85)
• SYNC/TIME CODE (page 86)
• I/O STATUS (page 91)
• MISC SETUP (page 94)

Operating the Touch Panel

Changing the channel
"CH XX" which is displayed next to the window name
indicates the number of the channel.
To change the channel, press the ACCESS button on
the corresponding channel strip.
Example: To change the channels to be displayed from
CH-1 to CH-48
1
Press the 25 to 48 button on the Assignment panel
to switch the faders to channels 25 to 48.
2
Press the ACCESS button corresponding to the
CH-48.
"INPUT/PAN/ASSIGN: CH 48 (+ channel name)"
appears on the window.
You can also change the channel by using the +/-
CHANNEL button on the Parameter Setting panel.
42
Chapter 3 Menu
Selecting the item
Many functions can be directly switched by button
icons on the display. The color of the button icons will
change to show their status.
In this manual, such an operation is described using
the phrase "Touch .. to select...".
The color change is not described if it is not necessary.
Setting the function ON/OFF (or IN/OUT)
on the window
The IN button and NOTCH button allow you to
switch the appropriate function on or off on the
EQUALIZER/FILTER window and INPUT/PAN/
ASSIGN window.
When you touch one of these buttons, the color of the
button turns green and this means the function of these
buttons is IN (or ON). When you touch one of these
buttons again, the color of the buttons turns gray and
this means that the function of those buttons is OUT
(or OFF).
Selecting the channel or source
individually
On the AUDIO INPUT ROUTING window and
AUDIO OUTPUT ROUTING window, when you
want to select a single channel, the sub menus of two
levels open. Touch the desired channel or source to
select it.
The sub menu closes when you make a selection or
touch any point other than the sub menu.
Sub menus of two levels
Example: IN button
Blue or green: IN status
Gray: OUT status