Sony DMX-R100 Operating Instructions Manual page 40

Basic Components and Functions of the Windows
• TO NEXT: Return time mode is set to HOLD TO
NEXT.
• TOP TO END: Return time mode is set to TOP TO
END.
• WRITE HOLD: Turns on or off the WRITE HOLD
mode.
• TOUCH HOLD: Turns on or off the TOUCH HOLD
mode.
4 READY SETUP button
Dark yellow (OFF): Normal status
Light yellow (ON): Ready setup status
(Available to set READY/SAFE)
Normally, this button is dark yellow (READY/SAFE
setup is off). In this case, the buttons, controls and
switches directly control the audio processing.
When you touch the button shown, it turns light
yellow. This allows you to select controls to the
READY status.
Now, when you operate the controls, they switch
between READY active and READY off, and the
controls do not control the audio processing. Press
READY SETUP again to revert the controls to audio
processing.
With READY SETUP on, controls switch as follows:
Buttons: Whenever you operate the buttons on the
panel and window, the READY status is switched.
Controls: Turning them clockwise results in setting
them to READY. Turning them counterclockwise
results in setting them to SAFE. Also touching the
numerical value on the display window results in
switching READY/SAFE.
Faders: Whenever you touch the fader, READY/
SAFE is switched. Also pressing the numerical value
on the display window results in switching READY/
SAFE.
WRITE buttons on the channel strips: Whenever
you press the WRITE button, all of the controls that
can be dynamically automated in the channel are
READY'ed (i.e. are in READY status).
40
Chapter 3 Menu
Notes
• The READY SETUP cannot be turned ON (light
yellow) when the timecode is run at PLAY speed
executing automation.
• When the READY SETUP button is set to ON, the
faders, controls and buttons, do not control the sound.
• If the timecode is run at PLAY speed, while you set
the automation items, READY SETUP is
automatically switched off.
• On the channel involved in automation, the WRITE
button in READY mode blinks in two ways;
–While READY SETUP is ON
On
Off
1 second
–While READY SETUP is OFF
On
Off
1 second
5 OPTION button
This button is effective when the READY SETUP
button is lit yellow. If you touch this button, the pull
down menu opens and you can select the items to be
READY'ed.
• ALL EQs: Sets the faders/equalizers of all channels
to READY.
• ALL DYNAMICs: Sets dynamics of all channels to
READY.
• ALL AUX KNOBs: Sets the AUX SEND controls of
all channels to READY.
• ALL AUX BUTTONs: Sets the AUX SEND buttons
of all channels to READY.
• ALL CUTs: Sets the cut setting of all channels to
READY.
• ALL ASSIGNs: Sets the ASSIGN buttons of all
channels to READY.
• ALL PANs: Sets the pan setting of all channels to
READY.
• ALL FADERs: Sets the faders of all channels to
READY.