Sony DMX-R100 Operating Instructions Manual page 62

Menu Windows
fader level is copied to the MTR or AUX fader.
1-24 and 25-48 buttons: To select the desired source
faders 1-24 or 25-48 as a group, touch and light either
button. Then, the faders selected are copied to the
MTR or AUX faders.
Executing the fader copy
To copy the channel fader of CH 1 to the AUX
3 send fader
1
Touch the AUX button of the CH b AUX section,
then select AUX3 on the sub-menu.
2
Touch the INDV button of the CH b AUX
section.
The button lights in green.
3
Hold the ACCESS button of CH 1 on the panel.
To copy all channel faders of CH 1 to CH 24-
to the MTR send faders
1
Touch the 1-24 button of the CH b MTR section.
2
Confirm the dialog information, then touch "OK"
on the dialog box.
Note
When the destination AUX buses are set to MONO
mode, the fader copy is executed, regardless of the
pan setting.
62
Chapter 3 Menu