Sony DMX-R100 Operating Instructions Manual page 36

Locations and Functions of Parts and Controls
DMBK-R105 8CH Insertion board
Inputs/outputs unbalanced analog signals (0 dBu
standard). The insertion point is set on the AUDIO
OUTPUT ROUTING screen.
8
DMBK-R106 Interface Board for ADAT
Connects external devices such as ADAT
boards, or external devices such as tape recorders that
have an ADAT interface.
DMBK-R107 Interface Board for TDIF
Connects external devices such as tape recorders that
have a TDIF 2) interface.
.........................................................................................................................................................................................................
1) ADAT is the registered trademark of the interface
of ALESIS STUDIO ELECTRONICS, INC.
2) TDIF is the trademark of the interface of TEAC
Corporation.
36
Chapter 2 Locations and Functions of Parts and Controls
DMBK-R105
ANALOG INSERTION ( 0dB )
7 6 5
1)
interface
DMBK-R106
INTERFACE BOARD FOR ADAT
DO 1-8
DMBK-R107
INTERFACE BOARD FOR TDIF
DI/O
Note
You can use only one DMBK-R105 8CH Insertion
Board in the DMX-R100.
4 3 2
Note that this board does not function when the unit is
running at 88.2 kHz or 96 kHz.
DI 1-8
Note that this board does not function when the unit is
running at 88.2 kHz or 96 kHz.
1