Sony DMX-R100 Operating Instructions Manual page 47

E SW (sub woofer) GANG button
When this button is lit, the sub woofer level is linked
with the MTR send level.
F Surround pan display/operation area
In surround mode, you can set the surround panning in
this area. Touch this area, then drag the icon to the
desired point.
G DIV (divergence) display window and jog dial
In surround mode, by touching the jog dial on the
window, you can set the divergence value (ratio of the
divergence among L channel, center channel and R
channel) using the jog dial on the unit. The set
divergence value is displayed on the DIV window.
Touching the DIV display window allows you to set
the mode to READY and to DROP IN/OUT of
automation WRITE.
H GANG (MTR pan gang) button
When this button is lit, the panning level of the MTR
bus is linked with the MTR send level.
I Surround position button
Touch this button to access the nine preset surround
pan positions. You can set the surround position by
selecting the icon corresponding to the desired type
from the list.
4 MTR PAN section
Displays the panning operation status of the MTR bus.
Touch this button to set the MTR pan on or off.
5 Channel PAN section
Displays the channel panning operation status. Touch
this button to set the channel pan on or off.
47
Chapter 3 Menu