Memory Module - HP ENVY 14 Service Manual
Notebook pc
Hide thumbs
Also See for ENVY 14:
- Maintenance and service manual (146 pages) ,
- User manual (64 pages) ,
- Getting started (79 pages)
Table of Contents
Advertisement
2.
Remove the RTC battery from the system board. The RTC battery is attached to the system board
with double-sided tape.
Reverse this procedure to install the RTC battery.
Memory module
Description
4096-MB (PC3, 10600, 1333-MHz)
2048-MB (PC3, 10600, 1333-MHz)
1024-MB (PC3, 10600, 1333-MHz)
Before removing a memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery cover and battery (see
5.
Remove the memory module/wireless module compartment cover (see
on page
Remove the memory module:
1.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The memory module tilts up.)
50
Chapter 4 Removal and replacement procedures
45).
Battery on page
37).
Spare part number
599092-001
598856-001
598859-001
WLAN module
ENWW
Advertisement
Table of Contents
