HP ENVY 14 Service Manual page 55

Notebook pc
Hide thumbs Also See for ENVY 14:
Table of Contents

Advertisement

4.
Disconnect the WLAN antenna cables from the terminals on the WLAN module.
NOTE:
The 2/gray WLAN antenna cable is connected to the WLAN module 2/Aux terminal.
5.
Remove the two Phillips PM2.0×3.0 screws that secure the WLAN module to the system board.
(The WLAN module tilts up.)
ENWW
The 1/black WLAN antenna cable is connected to the WLAN module 1/Main terminal.
Component replacement procedures
47

Advertisement

Table of Contents
loading

Table of Contents