Adjusting The Head Height - Roland VersaArt RA-640 User Manual

Setup of Media

DRYER
OFF
Current preset
temperature
For the individual setting method of this setting item and the description, refer to
perature Setting for the Media Heating System."
2
To cancel the setting
Procedure


3.

Adjusting the Head Height


HEAD HGT LOW
[CHANGE]

HEAD HEIGHT
HIGH

H e i g h t - a d j u s t m e n t l e v e r
Move firmly, until it stops.

Close the front cover.
For the individual setting method of this setting item and the description, refer to  p. 94, "Adjusting Head
Height to Match Media Thickness."
44
Use
40℃
Recommended temperature: 40 °C (104°F)
Press
Temperature to
be set
Press during the setting.
QUIT SETTING?
YES [NO]
MENU
MEDIA SETTING
Press
NEXT
Press
When the left figure is displayed, open the front cover.
LOW
High
Low
to set the temperature.
to enable the setting.
Press to select [YES].
Press .
The screen returns to the screen shown at the left.
By selecting [NO], the screen returns to the screen dis-
played when you pressed
to select [CHANGE].
to enable the setting.
Move the height-adjustment lever to adjust
the head height.
When moving to the [High] direction, the buzzer
sounds twice, and to the [Low] direction, the buzzer
sounds once.
Normally set to [Low]. For the media that is
wrinkled and comes loose from the platen, set
to [High].
p. 87, "Making the Tem-

.