Control Of Media Heating System During Preheating; Drying The Trailing Edge Of The Printing Area On The Dryer - Roland VersaArt RA-640 User Manual

Control of Media Heating System during Preheating

Note: Preheating: State that the main power and the sub power are switched on and
(state that media setup is not completed)
Procedure

Press .

MENU
HEATER MENU

HEATER MENU
PREHEATING

PREHEATING
30 C MENU

W1200mm
SETUP SHEET
Default Setting
Water-based ink model
[PREHEATING]: OFF
Solvent-based ink model
[PREHEATING]: 30 °C (86 °F)

Drying the Trailing Edge of the Printing Area on the Dryer

Procedure

Press .

MENU
HEATER MENU

FEED FOR DRY
DISABLE
ENABLE

W1200mm
SETUP SHEET
Fully Utilize the Media Heating System
Press several times to display the left figure.
Press , and then
Press .
Press
MENU: The system performs heating to the preset tem-
perature at all times, without lowering the temperature
during preheating.
30 °C: The system keeps 30 °C during preheating.
OFF: The system switches the media heating system off
during preheating.
Press to enable the setting.
Press to go back to the original screen.
Press several times to display the left figure.
Press twice.
Press
Press to enable the setting.
Press to go back to the original screen.
.
to select setting.
to select "ENABLE."
is not lighted
4
89