Configuring Linksys Key System Parameters; Enabling Call Features - Cisco 501G Administration Manual

Customizing Cisco SPA and Wireless IP Phones

Configuring Linksys Key System Parameters

STEP 6
Configuring Linksys Key System Parameters
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5

Enabling Call Features

Cisco SPA500 Series and WIP310 IP Phone Administration Guide
Click Submit All Changes.
To configure the phone as part of a Linksys Key System (for use with the
SPA9000):
Log in to the web administration interface.
Click Admin Login and advanced.
Click the SIP tab.
Configure the following fields:
• Linksys Key System—Enables or disables the Linksys Key System for use
with the LVS SPA9000. Defaults to yes. See the
Administration Guide
• Multicast Address—Used by the SPA9000 to communicate with Cisco IP
phones. Defaults to 224. 1 68. 1 68. 1 68:6061. (For the SPA501G, can be
configured using the IVR. See the
section on page
• Force LAN Codec—Used with the SPA9000. Choices are none, G.711u, or
G.711a. Defaults to none.
Click Submit All Changes.
This section describes how to enable and disable call features on the phone.
for more details.
"Using IVR on the SPA501G IP Phone"
17.)
Cisco SPA9000 System
3
40