Configuring Linksys Key System Parameters; Enabling Call Features - Cisco SPA303 Administration Manual

Customizing Cisco SPA and Wireless IP Phones

Configuring Linksys Key System Parameters

Configuring Linksys Key System Parameters
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5

Enabling Call Features

Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
To configure the phone as part of a Linksys Key System (for use with the Cisco
SPA 9000):
Log in to the configuration utility.
Click Admin Login and advanced.
Click the SIP tab.
Under Linksys Key System Parameters, configure the following fields:
• Linksys Key System—Enables or disables the Linksys Key System for use
with the Cisco SPA 9000. Defaults to yes. See the
Administration Guide
• Multicast Address—Used by the Cisco SPA 9000 to communicate with
Cisco IP phones. Defaults to 224. 1 68. 1 68. 1 68:6061. (For the Cisco
SPA501G, can be configured using the IVR. See the
Cisco SPA301 and Cisco SPA501G IP Phone" section on page
• Key System Auto Discovery—Enables or disables auto discovery of the call
control server (for example, the Cisco SPA 9000). Disable this feature for
teleworkers or other scenarios where multicast does not work.
• Key System IP Address—IP address of the call control server IP. Enter the IP
address for teleworkers or other scenarios where multicast does not work.
• Force LAN Codec—Used with the Cisco SPA 9000. Choices are none,
G.711u, or G.711a. Defaults to none.
Click Submit All Changes.
This section describes how to enable and disable call features on the phone.
for more details.
3
Cisco SPA 9000 System
"Using IVR on the
29.)
54