Downloading The Firmware; Cisco Spa500 Series And Wip310 Ip Phone Administration Guide - Cisco 501G Administration Manual

Getting Started
Upgrading Firmware
STEP 1
STEP 2
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
NOTE
STEP 1
STEP 2

Cisco SPA500 Series and WIP310 IP Phone Administration Guide

SPA502G, SPA504G, SPA508G, SPA509G:
Press the Setup button.
Scroll to Network and press Select. The IP Address is displayed under Current IP.
SPA525G:
Press the Setup button.
Scroll to Status and press Select.
Scroll to Network Status and press Select. The IP address of your phone is
displayed.
WIP310:
In the Home screen, press the Select key and navigate to
Press the Select key and navigate to Phone Info.
The IP Address section displays the IP address.

Downloading the Firmware

Requires a Cisco.com user ID and password.
Direct your browser to the following URL:
center/index.shtml.
Search to locate your product.
Settings
http://www.cisco.com/public/sw-
1
.
9