Configuring Phone Features; Configuring The Message Waiting Indicator; Configuring Ring Tones - Cisco 501G Administration Manual

Customizing Cisco SPA and Wireless IP Phones

Configuring Phone Features

STEP 4
STEP 5
Configuring Phone Features
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
NOTE
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
Under Service Annc Serv, choose yes.
Click Submit All Changes.
The following sections describe how to configure features on the phone such as
the message waiting indicator, ring tones, and audio features.

Configuring the Message Waiting Indicator

You can configure the message waiting indicator (MWI) for separate extensions on
the phone. The MWI lights based on the presence of new voicemail messages in
the mailbox. However, if the indicator at the top of your SPA500 Series IP Phone is
not lighting when voice mail is left, or you are not seeing message waiting
notifications on your WIP310:
Log in to the web administration interface.
Click Admin Login and advanced.
Click the Ext <number> tab.
Under Call Feature Settings, in the Message Waiting field, choose yes.
Click Submit All Changes.

Configuring Ring Tones

You can define up to ten ring tones for a SPA500 Series IP Phone.
WIP310 ring tones are not configurable from the web administration interface.
3
49