Understanding Administrator And User Views; Accessing Administrative Options - Cisco 501G Administration Manual

Getting Started
Using the Web Administration User Interface
STEP 1
STEP 2
STEP 3
STEP 4
NOTE
NOTE
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
SPA525G:
Press the Setup button.
Select Network Configuration.
Scroll to Web Server and make sure it is set to On.
Press Save.

Understanding Administrator and User Views

Depending on whether you are a VAR or service provider, you might have different
privileges. By default, the Administrator account name is admin, and the User
account name is user. These account names cannot be changed.
If the service provider set an Administrator account password, you are prompted
for it when you click Admin Login.
The Administrator account can modify all web profile parameters, including web
parameters available to the user login. The Administrator specifies the parameters
that a User account can modify using the Provisioning tab of the web UI.
No default passwords are assigned to either the Administrator or User accounts.
Only the Administrator account can assign and change passwords.

Accessing Administrative Options

To access administrative options, either:
• Log in to the web interface, then click Admin Login.
• Enter the following URL when accessing the interface:
http://phone.ip.address/admin/
To save changes on a web page, click Submit All Changes before switching
between User and Admin Login or between basic and advanced views. Switching
logins or views discards any unsubmitted changes.
1
13