Andrew ES45T Installation, Operation And Maintenance Manual page 59

ES45T-T Reflector Assembly
Step 5
Attach remaining end of elevation strut to elevation axis bracket of main triangle assem-
bly as shown in Figures 71 and 72.
•
Use ¾ x 4-½ in. bolt, lockwasher and nut
You have now completed the attachment of the reflector to the tripod ground mount
assembly. Proceed to the Elevation and Azimuth Adjustments section for instructions on
pointing your antenna towards the desired satellite.
Figure 70
Figure 72
59
Figure 71
Installation Procedures