Andrew ES45T Installation, Operation And Maintenance Manual page 20

Step 14
Loosely attach azimuth strut end bracket (P/N 49767) to universal block (P/N 49705) as
shown in Figure 16.
•
Use ¾ x 1-¼ in. bolts, flatwashers and lockwashers
Step 15
Loosely attach block to appropriate rear pad as based upon calculations in Appendix F
to determine the mounting configuration of the azimuth strut shown in Figures 16 and
17.
•
Use ¾ x 5-½ in. bolts, lockwashers and nuts
Figure 16
Figure 17
20
Installation Procedures