Andrew ES45T Installation, Operation And Maintenance Manual page 38

ES45T-R Reflector Assembly
Figure 44 Figure 45
Step 5
Manually raise reflector to attach remaining end of elevation strut to elevation axis
bracket of main triangle assembly as shown in Figures 45 and 46.
•
Use ¾ x 4-½ in. bolt, lockwasher and nut
Figure 46
You have now completed the attachment of the reflector to the tripod ground mount
assembly. If assembling a ES45T-R antenna, proceed to the Elevation and Azimuth
Adjustments section for instructions on aiming your antenna at its desired satellite.
Installation Procedures
38