Operational Failures; Functional Failures; Cutting Failures; Unusual Noises - Canon iPF9000S Troubleshooting Manual

Troubleshooting Guide
B. Operational Failures
Category
B PosterArtist won't launch
B The main unit won't start
B Power turns off automatically
B Network-connected printer, once
visible, out of sight
C. Functional Failures
Category
C Freezing/slow
C
C
C No printing
C
C
D. Cutting Failures
Category
D Wavy cut surface
D Residual cutting chips on the reference
side
D Normally ended without cutting
D Line printed at the cutting position, but
without actual cutting
D Line printed at the cutting position on
printing
D Cut automatically
D Images cut halfway
E. Unusual Noises
Category
E Carriage drive
E
E
E
E
E
Item Subitem
Item Subitem
Item Subitem
Item Subitem
Rasping
Chattering
Creaky
Remedial Action (tool)
Chapter 4: Operational Failures ①
Chapter 4: Operational Failures ②
Chapter 4: Operational Failures ②
If "Automatic" is selected for the IP address of the printer, assign
a fixed IP address to it.
Remedial Action (tool)
Restart the printer.
Upgrade the firmware.
If paper has been added, initialize the Paper preferences and
update additional Paper from System Settings (user settings
will be lost).
Underpowered host PC
Check the network environment.
Bug in AutoCAD high-speed rendering/Ver.3.00 or later
Remedial Action (tool)
Chapter 4: Cutting failures without error indications
Chapter 4: Cutting failures without error indications
Chapter 4: Cutting failures without error indications
Chapter 4: Cutting failures without error indications
Chapter 4: Cutting failures without error indications
Chapter 4: Cutting failures without error indications
Chapter 4: Cutting failures without error indications
Remedial Action (tool)
After checking the idler pulley, go to 2F26.
Check the carriage tension unit.
The tube has hit the exterior to generate unusual noises.
Open and close the platen suction path selection valve
(normal).
Soiled carriage rail/Clean dry (never apply oil)/replace the
rail cleaner/replace the carriage bearing.
Broken head open/close lever
Replace the lever.
2-58