Canon iPF9000S Troubleshooting Manual page 36

Troubleshooting Guide
■Initial firmware
No. of non-ejecting nozzles
1 color (per chip)
■Running change firmware
The specifications have been changed from the versions shown below.
iPF500/600/5000/700: Ver.1.33
iPF8100/9100/8000S/9000S: Ver.1.37
iPF605/6200: Ver.1.02
iPF720:Ver.1.10
You can choose A: (default setting) or B: (if you want to use automatic stop） from Service mode.
No. of non-
A: (default setting ejecting nozzles
1 color (per chip)
B: (If you want to
use automatic
No. of non-
stop)
ejecting nozzles
1 color (per chip）
■iPF650/750 series, iPF6300/6350/8300 and later model
You can choose A: (default setting) or B: (if you want to use automatic stop) from User m
No. of non-
A (Default setting)
ejecting nozzles
1 color (per chip)
B (if you want to
use automatic
No. of non-
stop)
ejecting nozzles
1 color (per chip)
Error code
Check printout
Check head
Replace head
more than 0, less than 100
more than 100, less than 200
200 or over
iPF510/610/710/8000/9000: Ver.1.36
iPF810/820/6000S: Ver.1.03
iPF5100/6100: Ver.1.38
more than 0, less than 320
320 or over
more than 0, less than 100
more than 100, less than 320
320 or over
more than 0, less than 320
320 or over
more than 0, less than 100
more than 100, less than 320
320 or over
Applicable printhead
1010 LR or single-head model
1012 R head
1013 L head
280C LR or single-head model
280D R
280E L
2827 LR or single-head model
2828 R
2829 L
2-24
No. of nozzles impossible to back up
Less than 30 30 or over
--- Check printout
--- Check head
Check head Check head
---
Head replacement
No. of nozzles impossible to back up
less than 30 30 or over
--- Check printout
--- Check head
Replace head Replace head
---
No. of nozzles impossible to back up
less than 30 30 or over
--- Check printout
--- Check head
Replace head Replace head