Taking Pictures Using Burst Mode - Panasonic VQT1T63 Operating Instructions Manual

[REC] mode:

Taking Pictures using Burst Mode

Pictures are taken continuously while the shutter button is pressed.
Select the ones you really like from among the pictures you have taken.
1
Press [ ˜/‚ ] to display the burst mode selection
menu, and then press 3/4 to select the burst
mode.
A ˜ ‚ button
2
Press [MENU/SET].
You can also press the shutter button halfway to finish.
•
The menu screen disappears after about 5 seconds. At this
•
time, the selected item is automatically set.
3 Take a picture.
Hold down the shutter button fully to activate the burst mode.
•
Burst speed (pictures/
second)
Number of
recordable
pictures
¢ The burst speed is constant regardless of the transfer speed of the card.
The burst speed values given above apply when the shutter speed is 1/60 or faster and when
•
the flash is not activated.
Advanced (Recording pictures)
[OFF]
—
—
A
—
›
—
—
—
- 73 -
˜
¢
2.5
max. 4
Depends on the
remaining capacity of the
built-in memory/card.
max. 8
max. 3
ò
approx. 2
max. 3