Scene Detection - Panasonic VQT1T63 Operating Instructions Manual

When the camera identifies the optimum scene, the icon of the scene concerned is
displayed in blue for 2 seconds, after which its colour changes to the usual red.
> [i-PORTRAIT]
¦
[i-SCENERY]
[i-MACRO]
[i-NIGHT PORTRAIT]
[i-NIGHT SCENERY]
[ ¦ ] is set if none of the scenes are applicable, and the standard settings are set.
•
If a tripod is used, for instance, and the camera has judged that camera shake is minimal when
•
the scene mode has been identified as [
8 seconds.Take care not to move the camera while taking pictures.
An optimum scene for the specified subject will be chosen when set to AF tracking
•
∫ Face detection
When [ ] or [ ] is selected, the camera automatically detects a person's face, and it will
adjust the focus and exposure (P115).
Note
Due to conditions such as the ones below, a different scene may be identified for the same
•
subject.
Subject conditions: When the face is bright or dark, The size of the subject, The distance to
–
the subject, The contrast of the subject, When the subject is moving, When zoom is used
Recording conditions: Sunset, Sunrise, Under low brightness conditions, When the camera is
–
shaken
To take pictures in an intended scene, it is recommended that you take pictures in the
•
appropriate recording mode.
∫ Backlight compensation
Backlight refers to when light comes from the back of a subject.
In this case, the subject will become dark, so this function compensates the backlight by
brightening the whole of the picture automatically.
Basic

Scene detection

Only when [‡] is selected
•
Only when [Œ] is selected
•
], the shutter speed will be set to a maximum of
- 45 -
(P115)
.