∫ Disconnecting the USB connection cable safely
Proceed with the hardware removal using "Safely Remove Hardware" on the task tray of the
•
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of
the digital camera before removing the hardware.
Note
Turn the camera off before connecting or disconnecting the AC adaptor (optional).
•
Before inserting or removing a card, turn the camera off and disconnect the USB connection
•
cable. Otherwise, data may be destroyed.
With the Mac OS X v10.2 or an earlier operating system, set the Write-Protect switch of the
•
SDHC memory card to the [LOCK] position when importing pictures from an SDHC memory
card.
∫ Viewing the contents of the built-in memory or card using the PC (folder
composition)
Built-in memory
Card
DCIM
100_PANA
101_PANA
999_PANA
MISC
A new folder is created when pictures are taken in the following situations.
After [NO.RESET]
(P32)
•
When a card containing a folder with the same folder number has been inserted (Such as when
•
pictures were taken using another make of camera)
When there is a picture with file number 999 inside the folder
•
∫ Connection in the PTP mode (Windows
Set [USB MODE] to [PictBridge(PTP)].
Data can now be read only from the card into the PC.
When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP
•
mode.
Connecting to other equipment
100_PANA
in the [SETUP] menu has been executed
- 158 -
1 Folder number
2 File number
3 JPG:
MOV:
RW2:
MISC:
R
XP, Windows Vista
Pictures
Motion pictures
Pictures in RAW files
DPOF print
Favourite
R
and Mac OS X only)