Programme Shift - Panasonic VQT1T63 Operating Instructions Manual

In programme AE mode, you can change the preset
aperture value and shutter speed without changing
the exposure. This is called programme shift.
You can make the background more blurred by
decreasing the aperture value or record a moving
subject more dynamically by slowing the shutter
speed when taking a picture in programme AE mode.
Press the shutter button halfway and then use the joystick to activate programme shift while the
•
aperture value and the shutter speed are displayed on the screen (about 10 seconds).
The programme shift indication
•
Programme shift is cancelled if the camera is turned off or the joystick is moved up and down
•
until the programme shift indication disappears.
∫ Example of programme shift
(A): Aperture value
(B): Shutter speed
1 Programme shift amount
2 Programme shift line chart
3 Programme shift limit
Note
If the exposure is not adequate when the shutter button is pressed halfway, the aperture value
•
and shutter speed turns red.
Programme shift is cancelled and the camera returns to normal programme AE mode if more
•
than 10 seconds pass after programme shift is activated. However, the programme shift setting
is memorised.
Depending on the brightness of the subject, programme shift may not be activated.
•
Basic

Programme shift

appears on the screen when programme shift is activated.
A
2
2.8
4
(A)
5.6
8
11
- 43 -
F4.0 F4.0 1/30 1/30
1 2 3 4 5 6 7 8
1 1 / 2 1 / 4 1 / 8 1 / 15 1 / 30 1 / 60 1 / 125 1 / 250 1 / 500 1 / 1000 1 / 2000
(B)
6 6
9 10 11 12 13 14